3D data collection

The detection of the surface is carried out using 3D sensors comprising of at least two cameras and one projector.

3D data collection

The cameras are calibrated using a special calibration field, i.e. to calculate the position and alignment of the cameras and other parameters too.

The striped pattern projected by the projector enable identical points to be found in both cameras using the Gray code and the phase shift method. Triangulation then enables the calculation of the x, y and z coordinates of the surface that are stored in a 3D point cloud.

Contact

INB Vision AG

Phone +49 391 / 6117 - 300
Fax +49 391 / 6117 - 301
eMail Send e-mail